The JL600-Q9 pneumatic vacuum ball valve refers to ball valve whose working pressure is lower than the standard atmospheric pressure and forms certain vacuum. Applicable vacuum range: 0.6 * 10 ^ 6~1.3 * 10pa ^ -4. The valve is straight through type with a spherical seal, which can be used in both vacuum and low-pressure conditions. It can be installed at any position to connect or cut off the medium flow in the vacuum system pipeline. It is applied in industries such as vacuum, dairy products, wine, biotechnology, food, pharmaceuticals, beverages, cosmetics, and chemical.
FEATURES:
Tongue groove joint valve seat design, not easy to deform, zero leakage
Double flat precision bite structure, prevents corrosion, easy to disassembly and assembly
Compliant with ISO5211 standard high mounting design, ultra long life
Dual directional sealing, dual pressure bearing, low opening and closing torque, good flowability
Widely used for working pressure below standard atmospheric pressure, vacuum equipment in pressure holding state
| Nominal diameter | DN15～DN100 (mm) (If other diameter is required, please specify when placing order) |
| Nomial pressure | 1.3×10-7Pa～6×105pa (If you need other pressure standard, please specify when placing order) |
| Valve body material | SS304 (P), SS316 (R) |
| Sealing material | PTFE (F), NBR (X1) |
| FPM (X4) | |
| Medium temperature | W1: -20~80℃, W2: -20~150℃ |
| Connection mode | KF Chuck plate |
| Pneumatic actuator | JLAT Series, JLAW Series, Imported actuator series |
| Action mode | Double acting, Single acting normally closed, Single acting normally open |
| Note | Other special sealing material or special temperature can also be designed and selected according to customer requirements. |
Address：No.28, Xiangmin Rd, Songjiang district, Shanghai, China
TEL：+86 21-65566666
Follow WeChat
Get more information
search
